Salt Corrosion Test Chamber for metal surface treatment

Salt Corrosion Test Chamber/Uses:

The company specializes in the production of neutral salt spray test into the test chamber , low temperature test chamber, high and low temperature ( alternating ) test chamber , high and low temperature ( alternating ) heat test chamber and so on. According to user requirements , custom specifications for various models of various types and sizes of walk-in test chamber .

Technical Requirements

1.imported from Germany, high temperature and high humidity corrosive Class A gray PVC sheet .

2.tank heating tank for the interior heating .

3.saltwater tank set up in the housing bottom .

4.temperature control accuracy : about 0.1 celsius degree; over-temperature protection device.

5.External dimensions 1000 * 750 * 800.6

Hole incubator.

1.temperature range 0-100 celsius degree.

2.temperature control accuracy 0.1 celsius degree.

3.effective volume greater than 15L.

Technical indicators:

1.temperature range : -40 celsius degree, -20 celsius degree ~ +100 celsius degree

2.humidity range : 30 percent ~ 98 percent RH

3.the temperature fluctuation : about 0.5 celsius degree

4.the temperature deviation : less than 2 celsius degree

5.humidity bias : +2-3 percent RH

Salt Mist Test Chamber/Safety devices :

1.power overload, passing control back to the overload, short circuit protection

2.ground fault protection, motor overload protection

3.over-temperature protection

4.compression overvoltage, overload

5.for the protection of equipment,all alarms are automatically cut off the power , and send voice prompts.

Use site conditions :

1.Temperature:15 celsius degree ~ 35 celsius degree

2.Relative humidity : not more than 85 percent RH

3.Around without strong vibration,no strong electromagnetic fields

4.No high concentrations of dust around and corrosive substances

5.No direct sunlight or other sources of heat radiation

6.No strong airflow around when you need to force the ambient air flow,air flow should not be blowing directly on the box .

Certificate of these machines:

China official 3rd party calibration report

CE certiification

For the package:

1. PP film first

2. Vacuum package

3. PP film again

4. 10mm thickness PU foam to avoid collision

5. stronged plywood case

6. Standard ASLI CASE MARK

Our Main Products:

1) temperature humidity chamber

2) temperature fast change chamber (ESS chamber)

3) thermal shock chamber

4) temperture humidity combined salt spray chamber

5) temperture humidity combined vibration chamber

6) pressure accelerated aging chamber (PCT&HAST chamber)

7) high temperature aging chamber

8) sand and dust tester

9) rain/water spray chamber

10) salt spray chamber

11) UV climate resistant chamber

12) high temperature chamber/muffle furnace

13) vacuum oven

14) high frequency vibration tester

15) mechanical shock and impact tester

16) acceleration mechanical shock tester